Streamline operations with a MOTI-150A Portable busbar Bending Punching and Cutting machine. 

These three working units make it easy to cut, bend and punch the copper busbar.

1. Introduction of MOTI-150A Portable Hydraulic Busbar Processing Machine

This MOTI-150A Portable Busbar Bending Machine mainly processes copper and aluminum busbars of various specifications and sizes. 

The worker can punch, cut and bend copper busbars as long as they are on the corresponding processing unit. 

It is easy to operate, portable, free to move, and improves production efficiency. 

It is an ideal equipment for high and low voltage electrical switchgear manufacturing.

This MOTI-150A Portable Hydraulic Busbar Process Machine has the following main features:

1. Three in One : Bending Punching Cutting

The MOTI-150A Portable Busbar Processing Machine is equipped with three processing units of punching, shearing and bending, 

which can respectively perform punching, shearing and bending of copper busbars. 

The use of this MOTI-150A Portable Busbar Processing Machine can significantly improve the production efficiency compared with the traditional busbar processing equipment, 

and also significantly improve the convenience of use.

2. Saving time, improving production effciency

The working stroke of each processing unit of MOTI-150A Portable Busbar Processing Machine can be easily adjusted (within the stroke limit range), 

so the processing time can be reduced and the production efficiency can be improved.

3. Multi-function bending unit

By changing the mold, it can also realize multi-purpose processing functions, such as vertical bending, flat bending, embossing and reverse pressing, etc.

4. Easy to operate, especially for freshman

The MOTI-150A Portable Busbar Processing Machine is equipped with two operation modes of manual button and foot switch, 

which are easy to operate, convenient and flexible to use, and can be easily used and operated by ordinary skilled workers.

2. Technical Parameter of MOTI-150A Portable Busbar Processing Machine

3. Common faults and troubleshooting of the MOTI-150A Portable Busbar Processing Machine

(1) No Power Supply

Check if the fuse is burnt out. Replace the fuse core with a new one after it burns out

(2) The power supply has power but the motor does not work normally

Check if the motor is overloaded, if so, adjust the load to normal

(3) Even if the power supply is on and the motor works normally, the machine does not start and makes a loud noise

Check the direction of the motor, whether the coupling is loose, the relay, etc.

(4) The motor turns normally, but the entire operation does not execute

Check relays and electrovalve

(5) One unit does not work, but the load is applied to the solenoid valve

Check the limits and solenoid valves

(6) The up/down operation of the machine is malfunctioning, pressure can only be applied in one direction

Check the limits and solenoid valves

(7) The machine not working properly

Check the relief valve or more poorly connected relay

(8) Cylinder goes down quickly but cannot go up

Touch the solenoid valve, repair or replace the faulty cylinder

(9) Stop working after the cylinder is raised or lowered

Check the limit switch;

(10) The machine cannot stop after the oil cylinder rises or falls (oil pressure is high)

Check the limit switch