Its 16x250mm MOTI-50-3NC CNC busbar processing machine has three units: punching, shearing, and bending. 

Adjusting each unit to shorten the processing time and improve production efficiency is easy. It is used to process copper and aluminum busbars in different specifications. 

A relative operation unit can easily and quickly process copper and aluminum busbars, such as shearing, punching (circular hole and oblong hole), flat/horizontal bending, vertical bending, and knurling. 

Change different molds to do special processing to copper busbars, such as flat press, emboss, cable connector process, cut, flat crush, push, and bend.

Main Characteristics of CNC Copper Busbar Machine MOTI-50-3NC

1. The shearing unit uses sharp shearing, the incision interface is flat, with no droop, no burrs, and no waste. Beautiful shape.

2. The punching unit uses a united six-mode turnplate to make sure the upper lengthens the working life. No need to change molds frequently, and labor intensity is highly reduced. It is easy and quick to use. Producing efficiency is higher than a traditional one.

3. The bending station is a double-deck worktable, which ensures the three working stations can be operated at the same time without any interference. The bending station adopts an open structure, very convenient for picking out the processed copper busbar.

4. The machine has four casters so it is easy to move everywhere. There are two operating modes, manual button, and footswitch, which are easily operated and used for workers. Based on users' requirements, it can do all kinds of special shape processing with different molds or equipping parts.