Capacity: 3/8'' x 6'' copper ( 10mm x 150mm )
Capacity: 5/8'' x 8'' copper ( 15mm x 200mm )
#1. Have Bending Punching and Cutting functions in one machine ( 3 in 1 / Three in One )
#2. Capacity: up to 10mm x 150mm ( Thickness x Width)
#3. Manual operate type, portable busbar machine, mobile busbar machine
#4. Easy to learn and operate, cheap price.
Suitable for processing different size of copper busbar, that is from switchgears, switchboards, electric control panels, power control distribution, etc.
(1) Suitable for punching holes in copper and aluminum, max 5/8'' thickness
(2) Available punch sizes: 6mm to 21mm diameter in 1mm increments
(3) Gydraulic work cylinder
The standard size of punching die
Round Hole punch dies Φ7, Φ9, Φ10.5, Φ13.8, Φ17, Φ20.5 (mm)
We also can customize your required size of Round or Oval Hole punching molds if you need.
(1) Centering vice for exact positioning of bar through the blade to get square,
accurate cuts without rough edges
(2) Hydraulic work cylinder
(1) Max angle 90 degrees
(2) Set exact bend angle
(3) Ideal for series production
(4) Hydraulic work cylinder
(1) This hydraulic electromagnetic pump is easy to operate and has a wide range of applications
(2) High and low pressure two-stage output, large oil volume
(3) Low pressure with plunger type for increased effective pressure
(4) Automatic protection to ensure no leakage during use
(5) Pressure overload protection to avoid damage to the equipment due to overpressure
Please check the below link,
https://www.motiindustrial.com/article/FAQ_of_MOTI_Busbar_Machines/733.html